Presskit Timer · timer.presskit.live

Wrap it up

A full-screen countdown for the room. Run it from a phone or a laptop, show it on any screen with a browser, and every screen reads the same second.

Presskit TimerPresskit · Main hall
Timer10:00
Warningamber before the end
Message
Reactionsrain on every screen
Viewer display

The demo runs itself until you press something. Then it's yours.

Nothing to install

A browser on the controller and a browser on each screen. Phones, laptops, TVs, streaming sticks.

Count down or up

A talk gets a countdown. A workshop, a Q&A or a break gets a count up to a target.

One clock

Every screen draws from one end time, so they agree to within a frame, however many there are.

Hosted in Sydney

Run by Presskit Live. What it keeps, and for how long, is in the privacy policy.

What every screen shows

As large as the screen allows, and a colour only when it means something

The reading is the whole screen. It changes colour twice: amber for the last minutes, as many as you set, and red from zero. Red never stops the clock, so a speaker who runs over sees exactly how far.

Between sessionsYour workspace's logo, or its name. The logo here is a stand-in.

RunningThe time left, with the event's name, the time of day and the strip.

Counting upThe time since the start, toward a target. Red once it's reached.

WarningAmber for the last minutes. One, two, three, five or ten.

OvertimeRed from zero, counting on.

PausedFrozen and dimmed, so nobody mistakes it for running.

The event’s name top left, the time of day top right, a strip along the bottom edge that drains as the time goes. Each is a switch on the controller, and light or dark is the controller’s choice too.

A word to the speaker

A message under the time, on every screen at once

Type it on the controller and press Show: it lands under the digits on every screen in the room, in the workspace’s typeface, and stays until you clear it or replace it. Three lines at most, so it reads from the back. Between sessions it sits under the logo instead.

Presskit TimerPresskit · Main hall
Message
Timer10:00

The loop types each message on the controller and shows it; a new one replaces the last, and the final one lands under the logo between sessions. Press a control to take over.

One clock, every screen

The TV in the hall, the laptop on the lectern and the preview on your phone agree

The server holds one end time and never ticks. Each screen measures the server’s clock the way NTP does and draws the countdown itself, so they agree to within a frame whatever their own clocks say. A screen that loses the network keeps counting from what it last knew and reconnects on its own.

The TV in the hall

The laptop on the lectern, in light

The preview on your phone

Screens pair by a code

A TV never signs in

Open timer.presskit.live/screen on the TV and it shows a code. On your phone, scan it or type it, pick the room, and the TV is paired for ninety days, power cuts included: it opens straight back into its room. Unpair it from the controller and it goes back to a fresh code.

The QR here is a drawing, not a working code. The loop pairs the screen, shows its room, then starts again with a fresh code.

Your workspace, your look

Your logo between sessions, your typeface on the digits, your colours for amber and red

A workspace’s owner sets its brand once and every room and every screen follows: the logo an idle screen shows, the typeface the reading is set in, the warning and overtime colours, the presets a new room starts with, and the workspace’s own reactions, images of its own that pop up from the corner of every screen.

The timer's own look: the workspace's name, IBM Plex Sans, the theme's amber and red.

The same room with a brand: its logo, Barlow Condensed, its own warning and overtime colours.

10:00
IBM Plex Sans
The timer's own. Even, open figures.
10:00
Inter
The screen face everyone knows.
10:00
Atkinson Hyperlegible
Drawn for low vision: no look-alike figures.
10:00
Montserrat
Wide and geometric. Reads from the back row.
10:00
Barlow Condensed
Narrow, so a long reading stays large.
10:00
Manrope
Rounded and quiet.
10:00
Source Sans 3
Plain and warm.
10:00
JetBrains Mono
Monospace, for a room that likes a terminal.

All eight are open fonts and ship with the timer, so a TV draws the same figures as a phone and nothing is fetched from a font service.

Rooms and people

One workspace, as many rooms and screens as the day needs

Workspace

Your organisation: its brand, its people, its rooms and its screens. An owner invites people by link and removes them with a tap.

Room

One timer. Its own event name, presets and warning. A conference gets a room per hall; a workshop gets one.

Controller

A person, signed in with a Microsoft work account through Presskit Connect. There are no passwords anywhere.

Screen

A TV, a projector’s laptop, a tablet on the lectern. Paired by code, never signed in. It can only watch.

From the controller a person runs the room: starts, pauses and stops, nudges the time by a minute, puts a message under the digits, rains a reaction over every screen, and sees each paired screen and whether it is connected. Space starts and pauses. Two people can run the same room at once, and each sees what the other does as it happens.

Invite-only for now

Email us and we’ll set up your workspace

Presskit Timer is invite-only while we finish it. Tell us about your event and who will run it, and we’ll make your workspace and send an invite link. Open sign-up and plans will follow.

hello@presskit.live

What the timer keeps about you and your screens, for how long, and how to delete it is in Presskit’s privacy policy.